EXPOSURE UNITS
UVMARK+
 |
Exposure unit , for Metalphoto ®, Metalphoto Plus ®, Polycolor ® and ID MARK ® plates up to 254 x 305 mm
Featuring :
- mechanical timer to switch on/off the lamp
- light source and lamp power selectors
- honeycombed foam system to keep the film and processed plate in close contact.
|
UVMARK GF +
 |
Exposure unit for Metalphoto ®, Metalphoto Plus ®, Polycolor ® and ID MARK ® plates up to 305 x 508 mm
Featuring :
- memory digital timer to switch on/off the lamp. Ring when the cycle is over
- Vacuum system to keep the film and processed plate in close contact
|
OPTION SHAPING EQUIPMENT
9001 shears
 |
9001 SHEARS will cut aluminium plates up to 305 mm (12’’) wide and 1.5 mm thick.
Free access to the cutting blade is prevented by heavy shielding along both sides of the blade.
A safety latch is fitted to the pivot to prevent operation without it first being released.
The cutting bed is fitted with a rule for positional accuracy.
|
Corner rounder
 |
CORNER ROUNDER : quick corner rounding facility for labels and front panels. The table is split into two halves, each containing 90 degree stops, in the angle of which is a hardened radius of either 6 mm or 4 mm.
The punch has been ground to simultaneously marry both of these rounds when driven down by the cam actioned handle.
The material to be rounded is slid from the left or right hand side positively into the stops, to leave an overhang which is sheared through by the punch to leave a clean corner of either 6 mm or 4 mm radius.
12.8 x 12.8 mm (5 x 5’’) steel plate with screw holes for bench fixing. |
APPLI PADS
 |
Appli-pads are lint-free cotton pad which are used to wash off the sheet during processing.
Use also to apply plate cleaner and dyes.
The lint-free, smooth texture will prevent scratching the ID MARK sheet when processing...
|
|
Version française
