Thermoflan can offer all necessary products for rubber stamp making. Our
40 year old experience allowed us to choose and develop the best products for
stamp making.
Typesetting
Positive film : for laser prints (box of 100 sheets size
A4)
Day light film : to make a negative film from a positive one ( box of
100 sheets size 24 x 33 cm)
Developer : to develop day light films (5 liter
can to dilute with 10 liters of water)
Fixer : to fix day light films for
later uses (5 liter can to dilute with 20 liters of water).
Matrix board moulding
Hard photopolymer plate : to get a master plate that will be pressed
into the matrix board Size A4 – Thickness 175 – box of 20 pcs
Jet distributor
Basf distributor
Thermoflan matrix boards : Compressed powder matrix
board that becomes as soft as a paste for easy penetration of the image (lead
types, magnesium or photopolymer plate). When cured, the material becomes very
hard and produces a die in which rubber is molded. Available sizes :
- A4 (315 x 235 mm - 12.40 x 9.25 inches) boxes of 20 – 50 or 100 pcs
- or 650 x 500 mm - 25.59 x 19.68 inches boxes of 10 – 20 or 25 pcs Standard
thicknesses : 4 or 5 mm Other available thicknesses : 6 – 7 – 8
and 9 mm for photopolymer, magnesium or zinc plates.
Thermoflan advantages :
Deeper penetration of magnesium and photopolymer plates
Increased
softness due to an all powder structure, for easier and deeper penetration of
detailed lettering and graphics into the board
Easier processing range : As
it is only made of compressed powders , and not impregnated cardboards, the plate
becomes as soft as a paste when subjected to heat , with a wide time and temperature
range, and do not damage the master plate characters.
Rubber
vulcanization
Unvulcanized rubber : thickness 2.5 mm, colour : white or
blue rolls of 12 to 15 Kg
PRODUCTS
FOR LASER ENGRAVED RUBBER STAMPS
Laserable rubber Size A 4 Thickness 2.3 mm Producing sharp
engraving for quality prints.
