| |
 |
| PRODUCTS
FOR CONVENTIONAL PRE-INKED STAMPS |
|
| Thermoflan can offer all necessary products for pre inked stamp making.
Our 40 year old experience allowed us to choose and develop the best products
for stamp making. | | Typesetting |
|
- Positive film : for laser prints (box of 100 sheets size A4)
- Day
light film : to make a negative film from a positive one ( box of 100 sheets size
24 x 33 cm)
- Developer : to develop day light films (5 liter can to dilute
with 10 liters of water)
- Fixer : to fix day light films for later uses. (5
liter can to dilute with 20 liters of water).
|
| Matrix board moulding | |
|
 | |
Hard
photopolymer plate : to get a master plate that will be pressed into the matrix
board. Size A4 – Thickness 175 – box of 20 pcs
|
- Jet distributor
- Basf distributor
|
Thermoflan matrix boards : Compressed powder matrix
board that becomes as soft as a paste for easy penetration of the image (lead
types, magnesium or photopolymer plate). When cured, the material becomes very
hard and produces a die in which rubber is molded.
Available sizes :
- A4 (315 x 235 mm - 12.40 x 9.25 inches) boxes of 20 – 50 or 100 pcs
- or 650 x 500 mm - 25.59 x 19.68 inches boxes of 10 – 20 or 25 pcs
Standard
thicknesses : 4 or 5 mm
Other available thicknesses : 6 – 7 – 8
and 9 mm for photopolymer, magnesium or zinc plates. | |
| Thermoflan advantages : |
- Deeper penetration of magnesium and photopolymer plates
- Increased
softness due to an all powder structure, for easier and deeper penetration of
detailed lettering and graphics into the board
- Easier processing range : As
it is only made of compressed powders, and not impregnated cardboards, the plate
becomes as soft as a paste when subjected to heat , with a wide time and temperature
range, and do not damage the master plate characters.
|
CHASE BOARD : The chase board comprises
- a thermosetting
plate, allowing to mould, after the required preheating time, photopolymer plates
without damaging the characters,
- a damming frame, polycondensated with the
plate, to offer perfect calibration of the ink when it is molded. |
|
| Advantages of Thermoflan chase boards are : |
- It saves time since the user no longer has to assemble
the casting chase or clean the equipment ( the chase board is thrown away or stored
for re-use) , the pre-inked slab is easy to remove from the mold and the system
is flexible owing to the different available sizes
- It also saves money in
that it allows production in large quantities. Moreover, steel casting chase and
cooling unit are no longer necessary since the premix cools at room temperature
within eight minutes
| |
| Premix Gelling | |
- Premix gel (black, red, blue, green, purple) that will give
the micro porous material including ink, to be placed inside a pre-inked mount
(1 Kg or 1 gallon cans)
- Felt : used as ink holder , available in several sizes
: A4, A5, A6 , A7 and A8
- Reinking bottle : to re ink stamps, available in
several colors
| | |
| PRODUCTS
FOR LASER ENGRAVED PRE-INKED STAMPS |
 | |
- Micro porous material :
Size A 4, thickness 6 mm or 2.3 mm, for
quality stamp engraving. - Inks for micro porous material :
Available in
several colours. | | | | | |
