| |
 |
| UVMARK+ | |
 | |
| UV
MARK UNIT : for ID MARK ® sheets up to 254 x 305 mm | | |
| Featuring : | - mechanical
timer to switch on/off the lamp
- honeycombed foam system to keep the film and
processed plate in close contact
| |
| UVMARK GF + | |
 | |
| UVMARK
GF EXPOSURE unit for ID MARK ® sheets up to 305 x 508 mm | | |
| Featuring : | - vacuum
to ensure the artwork and material to be exposed are held in perfect contact
- time
setting via the touch membrane control panel
| |
| |
|
| 9001 shears | |
 | | 9001
SHEARS will cut aluminium plates up to 305 mm (12’’) wide and 1.5 mm
thick.
Free access to the cutting blade is prevented by heavy shielding along
both sides of the blade.
A safety latch is fitted to the pivot to prevent
operation without it first being released.
The cutting bed is fitted with
a rule for positional accuracy. |
| Corner rounder | |
 | | CORNER
ROUNDER : quick corner rounding facility for labels and front panels. The table
is split into two halves, each containing 90 degree stops, in the angle of which
is a hardened radius of either 6 mm or 4 mm.
The punch has been ground to
simultaneously marry both of these rounds when driven down by the cam actioned
handle.
The material to be rounded is slid from the left or right hand side
positively into the stops, to leave an overhang which is sheared through by the
punch to leave a clean corner of either 6 mm or 4 mm radius.
12.8 x 12.8 mm
(5 x 5’’) steel plate with screw holes for bench fixing. | |
|
 | | Appli-pads
are lint-free cotton pad which are used to wash off the sheet during processing.
Use also to apply plate cleaner and dyes.
The lint-free, smooth texture will
prevent scratching the ID MARK sheet when processing ... | |
| | |
