Signage   / / / /   Metalphoto / Polycolor / Idmark / Alumamark / Alumajet / Cutting machine / Doming     application area / introduction - technical features / manufacturing technics / equipment / product range / video of use / literature (pdf file)

ILS LASERS  ILS II   Available 12, 30 or 50 W, size 410 x 295 mm (A3). Motorized Z axis allows to process pieces up to 120 mm Air assistance Consult our range of laser engravers  ILS III   Available in 12, 30 , 50 or 100 W, size 610 x 457 mm (A2) Openable front door Autofocus. Motorized Z axis allows to process pieces up to 210 mm . Red dot pointer Air assistance Consult our range of laser engravers  ILS IV   Available in 30, 50 or 100 W, size t 1000 x 600 mm traversing-door design Autofocus Motorized Z axis allows to process pieces up to 210 mm Red dot pointer Air assistance ethernet connectivity Consult our range of laser engravers  OPTION : SHAPING EQUIPMENT  9001 shears   9001 SHEARS will cut aluminium plates up to 305 mm (12’’) wide and 1.5 mm thick. Free access to the cutting blade is prevented by heavy shielding along both sides of the blade. A safety latch is fitted to the pivot to prevent operation without it first being released. The cutting bed is fitted with a rule for positional accuracy.  DM 525 shears   DM 525 SHEARS has a cutting capacity of 63,5 cm for 1.5 / 2 mm thick aluminium plates. On lowering the operating handle, a spring loaded clamp is activated which holds the material securely during cutting. These shears comprise an epoxy coated cast aluminium frame fitted with hardened and ground steel blades protected by a clear acrylic front safety guard protecting the operator and making it possible to see the blades so that the material to be cut can be aligned accurately. Metric edge scales and adjustable front and back stops for batch work.  Corner rounder   CORNER ROUNDER : quick corner rounding facility for labels and front panels. The table is split into two halves, each containing 90 degree stops, in the angle of which is a hardened radius of either 6 mm or 4 mm. The punch has been ground to simultaneously marry both of these rounds when driven down by the cam actioned handle. The material to be rounded is slid from the left or right hand side positively into the stops, to leave an overhang which is sheared through by the punch to leave a clean corner of either 6 mm or 4 mm radius. 12.8 x 12.8 mm (5 x 5’’) steel plate with screw holes for bench fixing.

log in / create your profile / contact us / map of the site / legal notices