AlumaJet™ is printed right from an ink jet printer.
We can help
you to choose a printer according to your requirements and budget.
Printers that have a " J " configuration printer
path will accept thinner (.005'') Alumajet sheets.
Thicker sheets (0.12'')
require a " straight through " printer.
" 180° "
printers are not compatible.
OPTION
: SHAPING EQUIPMENT
9001 shears
9001
SHEARS will cut aluminium plates up to 305 mm (12’’) wide and 1.5 mm
thick. Free access to the cutting blade is prevented by heavy shielding along
both sides of the blade. A safety latch is fitted to the pivot to prevent
operation without it first being released. The cutting bed is fitted with
a rule for positional accuracy.
DM 525 shears
DM
525 SHEARS has a cutting capacity of 63,5 cm for 1.5 / 2 mm thick aluminium plates.
On lowering the operating handle, a spring loaded clamp is activated which holds
the material securely during cutting. These shears comprise an epoxy coated
cast aluminium frame fitted with hardened and ground steel blades protected by
a clear acrylic front safety guard protecting the operator and making it possible
to see the blades so that the material to be cut can be aligned accurately.
Metric edge scales and adjustable front and back stops for batch work.
Corner
rounder
CORNER
ROUNDER : quick corner rounding facility for labels and front panels. The table
is split into two halves, each containing 90 degree stops, in the angle of which
is a hardened radius of either 6 mm or 4 mm. The punch has been ground to
simultaneously marry both of these rounds when driven down by the cam actioned
handle. The material to be rounded is slid from the left or right hand side
positively into the stops, to leave an overhang which is sheared through by the
punch to leave a clean corner of either 6 mm or 4 mm radius. 12.8 x 12.8 mm
(5 x 5’’) steel plate with screw holes for bench fixing.
